Replacing valve cover gaskets

I just realized that I had never gotten around to mentioning something that can turn an annoying task into something very quick and simple with one little trick.   The first picture is a motor. Next, I have inserted 6 set screws, 1/4-20, into the holes for the valve cover bolts. You then drop the gasket on after applying whatever  you like for sealing purposes, apply said sealer to the top of the gasket, drop the valve cover on, then remove one set screw with an allen wrench, put the bolt in, remove another screw, insert another bolt, etc... then snug up the bolts to spec. The set screws keep the gasket from creeping around on you while you get the bolts started.